BULLET TYPES
DOWNLOADS
RELOADING COMPONENTS
Sako manufactures cases and bullets for reloaders. Their tough quality meet the most exacting requirements for accuracy and durability. Sako brass cases have a reputation of outlasting competition. Made from high quality copper alloy, they have been tested to sustain repeated loading noticeably better than standard cases. Naturally, the smartest way to buy quality cartridges and get long-lasting cases is to use Sako Range competition and training cartridges.
Sako bullets have been developed with an eye to the needs of different types of shooting and hunting. Fine example of this is Cuthead competition and training bullet with cutter groove that cuts a clean and round hole in the target for easy score interpretation.
Warning:
As use of proper reloading procedures are beyond our control, we assume no liability or give any warranty against damages or injuries caused by use of reloads. Improper and poorly made reloads can ruin your rifle. They can also be dangerous to the shooter and standers by and may cause serious injuries or death. No rifle manufacturer including ourselves gives any warranty on rifles when reloads are used.
SAKO BRASS CASES
| 22 PPC USA 222 Rem 222 Rem Mag 223 Rem 22-250 Rem 243 Win 25-06 Rem 260 Rem 6.5x55 SE 7x33 Sako 270 Win 7x64 7x65R 7 mm Rem Mag 7.62x39 308 Win 7.62x53R 30-06 Sprg 300 WSM 300 Win Mag 8.2x53R 8x57JS 8x57JRS 338 Fed 338 Win Mag 9.3x62 9.3x66 Sako 9.3x74R 375 H&H Mag |
SAKO RIFLE BULLETS
| Diameter | Suitability | Bullet | Weight | Packing | ||||
|---|---|---|---|---|---|---|---|---|
| mm | inch | Code | Type | g | grs | Box | Case | |
| 5.7 | .224 | .222 Rem .223 Rem .22-250 Rem |
105G 106G 110G |
FMJ SP SP |
3,2 3,2 3,56 |
50 50 55 |
100 100 100 |
1500 1500 1500 |
| 6.16 | .243 | .243 Win | 114E 112E 113E |
FMJ SP SP |
5,8 5,8 6,5 |
90 90 100 |
100 100 100 |
1200 1200 1200 |
| 7.05 | .277 | .270 Win | 211B | HH | 10,1 | 130 | 50 | 600 |
| 7.23 | .284 | 7mm Rem Mag 7x33 |
216B 108B |
HH FMJ |
11,0 5,1 |
170 78 |
50 50 |
600 600 |
| 7.85 | .30 | .308 Win 7.62x53R .30-06 Sprg .300 Win Mag 300 WSM |
120A 129A 235A 256A 236A 227A 228A 146A 147A 143A 145A |
FMJ SP SHH HH SHH HH HH HP HP Cut FMJ FMJ Cut |
8,0 8,0 9,7 11,7 11,7 13,0 14,3 6,6 6,6 8,0 8,0 |
123 123 150 180 180 200 220 102 102 123 123 |
50 50 50 50 50 50 50 50 50 50 50 |
750 750 600 600 600 600 600 750 750 750 750 |
| 7.91 | .311 | 7.62x39 | 117A 134A |
FMJ SP |
8,0 8,0 |
123 123 |
50 50 |
750 750 |
| 8.20 | .323 | 8.2x53R 8x57 JS/JRS |
201F | HH | 13,0 | 200 | 50 | 600 |
| 8.60 | .338 | 338 Federal | 211F | HH | 16,2 | 250 | 50 | 600 |
| 9.28 | .365 | 9,3 mm | 266D | HH | 18,5 | 286 | 25 | 300 |
| HH = Hammerhead, HP = Hollow point, FMJ = Full metal jacket, SP = Soft point, SHH = Super Hammerhead Cut = bullet features cutting groove |
||||||||